Ecowitt WS90 7-in-1 Array with Sonic Anemometer & Haptic Rain Sensor
- Regular price
- £145.00 GBP
- Sale price
- £145.00 GBP
- Regular price
-
- Unit price
- / per
The 7-in-1 outdoor sensor array (WS90) which no longer uses the traditional tipping bucket rain gauge, but a haptic sensor which measures rainfall. The revised rainfall sensor is slightly sloped to improve accuracy and prevent rain pooling.
The outdoor sensor also measures temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. It requires mounting on the top of a 1 inch pole to ensure accurate readings and should be used with a compatible GW series gateway or display console.
Gateway & console compatibility
The WS90 requires a compatible Ecowitt gateway or display console to receive its readings; it does not connect directly to your router. Match the gateway or console to this array’s 868MHz UK/EU frequency.
- GW1200 WiFi gateway: connects to your network over 2.4GHz Wi-Fi, with app or web-browser setup and support for Ecowitt IoT control devices such as water valves and smart sockets.
- GW1100 WiFi gateway: a straightforward Wi-Fi option for receiving sensor data and uploading weather readings, with web-browser configuration. Choose an IoT-capable model below or above if you also want Ecowitt device control.
- GW2000 WiFi or wired gateway: offers 2.4GHz Wi-Fi or an RJ45 Ethernet connection to your router, plus support for Ecowitt IoT devices.
- GW3000 WiFi or wired gateway: offers Wi-Fi or RJ45 Ethernet, Ecowitt IoT support and local data recording to a microSD card (card required).
A compatible display console is an alternative if you want to view readings on a dedicated screen rather than through a gateway’s app or web dashboard. Check that the specific console via our compatibility matrix below and its installed firmware supporting the WS90, including its haptic rainfall readings, before purchasing.
Included
The Ecowitt WS90 includes the following items:
- WS90A 7-in-1 external sensor array 868MHz (UK/EU approved)
- Electronic manual via QR code or website
Technical & Manual
External 7-in-1 sensor suite (WS90)
- Outdoor temperature and humidity
- Wind speed, gust speed, and wind direction
- Haptic rainfall sensor with rate and totals for day, week, month, and year
- Calculated wind chill, dew point and heat index display on the WS View App
- Solar light intensity
- UV index
- Solar powered with 2 x AA battery backup (batteries required for 24 hour operation)
- 868MHz UK / European frequency (A suffix)
- Requires mounting onto top of 25mm / 1 inch pole (available separately) and a suitable gateway or console to receive readings
An installation guide from Ecowitt can be found by clicking here.
To check which products this item can be used with click here to view the latest Ecowitt sensor matrix. All Ecowitt products we supply are 868MHz and suitable for use with others using the same frequency.
- 5 stars: 3 (100%)
- 4 stars: 0 (0%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Excellent service with a replacement under warranty. Super fast return service.
Great team
I can’t describe how helpful these folk were when I made an enquiry. Prompt and helpful responses which could only be informed by the fact that they use and are passionate about the kit they sell.
Thank you!
My original 7 - 1 lost the temperature sensor about 18 months ago. Then after the wettest start to 2026, it lost all the sensors.
The other stand-alone sensors worked - so I knew the console okay and was about to replace like-for-like when I saw this newer model.
It arrived quickly, well packaged and seems really well made. I disconnected everything and then put the batteries in the new sensor which started to flash correctly but that was it. No reading on the console. I tried again and again, looked online and read post after post - trying each of ideas. Nothing.
I was about to give up when I must have phrased the question in the search box slightly differently and DuckDuckGo's AI generated an answer with the steps to try and number one was upgrade your firmware! Doh!
Did that and bingo - it connected. It seems happy and accurate by comparing it to other stations in the area.
Will add that this sensor is much easy to install than the traditional one. Push in pole, tighten lightly, twist to north and tighten fully. It looks really professional and slightly sci-fi. I do miss the old wind cups spinning in a gale.
Weather Spares are always helpful and I'll be using them again.
Does the heating power other than being 12v dc matter which way you connect it ?
The red terminal would be positive and the black negative.
Will this sensor synchronize with Ecowitt HP2551 7 inch display?
Yes, so long as your console firmware 1.7.8 or higher. If it is lower than this then it can easily be upgraded via a MicroSD card within a few minutes.